Contact Detail

Address: 

Contact Person: Sophia

Email: okmachine@126.com

Tel: 0086-15298811938

 

Contact Person: Hapo

Email: okmachinery@126.com

Tel:0086-15995991938

skype : hapo83

Products

QGF-300 Barrel Production Line

1. Auto pulling out lid machine
  BG series full-auto lid pull off machine is a special equipment design for put off of 5 gallon machine. It can insure the lid don¡¯t broken and can reused. The machine is control by computer, so the capacity can adjust, outfit of lid put off can adjust by air tank, it solve the problem about different high of barrel and wide of barrel mouth , improve the success rate of  pull out lid.
  Output: 450b/h
  Total power: 0.02Kw
  Dimension: 500*500*1850
  Weight: 80Kg
  Material: 304#stainless steel
  Press of air source: 0.5-0.6Mpa
  Consumption of air: 0. 8m3/min

2. Full-auto interior washing machine
 Output: 450b/h
  Total power: 0.5Kw
  Dimension: 1600*980*1450
  Weight: 100Kg
  Blanking plate: 304#stainless steel
  Press of air source: 0.5-0.6Mpa
  Consumption of air: 0.5m3/min

3. Full-auto exterior washing machine
  The machine is before equipment of washing of barrel filling production line. It consists of transmission machine, brusher, water pump. Setting following function: main brusher, bottom brusher, side brusher and so on. Exterior brushing and spurt with water, rotate brush can carry out cleaning the outside barrel, washing quality is stable.
  Output: 450b/h
  Total power: 1.5Kw
  Dimension: 1600*980*1450
  Weight: 200Kg
  Blanking plate: 304#stainless steel
  Press of air source: 0.5-0.6Mpa
  Consumption of air: 0.5m3/min

4. QGF-450 5 gallon washing, filling and capping machine
  QGF-450 barrel filling machine is mainframe for produce 5 gallon barreled water. It consist of frame, water tank, pipeline, water pump, air tank, transmission machine, electric machine, can finish empty barrel washing , filling , capping through several washing , fit quantify  filling and auto wear lid and capping. The whole working process was control by PLC; realize stability washing effect, accurate filling capacity and perfect capping effect.
 The number of filling heads: three pieces
 Output: 450b/h
  Total power: 4.5Kw
  Dimension: 4300*1550*1700
  Weight: 800Kg
  Blanking plate: 304#stainless steel
  Press of air source: 0.5-0.6Mpa
  Consumption of air: 0.8m3/min

5. Auto barrel load machine
  The washed empty barrels are imported  to auto barrel loader work place, when the barrel loader¡¯s counter take count of 8£¬the barrel block air tank start to work, stop empty barrel, then air tank for push empty barrel start work, restoration after push barrels to barrel turn over frame, at this time barrel air tank start work, make the barrel at plane state and cut in support of barrel, principle axis of air tank for washing barrel start to work, empty barrels moved with chain to one work place, then handstanded, then the barrel loader restoration, then repeat the processing.
 Output: 450b/h
  Dimension: 600*800*750
  Material: 304stainless steel
  Press of air source: 0.5-0.6Mpa
  Consumption of air: 0.2m3/min

6. Light checker
  DJ inspection light use for lighting when inspect whether exist sundries in barrel.
  Total power: 0.9Kw
  Dimension: 700*120*520
  Weight: 10Kg
  Material: 304stainless steel
  Characteristic: save energy
  
7. Steam shrinking machine
  ZSM heat contracting machine is consist of water vessel and electric heat up, electric heat up to produce steam, when the barrels with plastic cover through inspected by inspection light pass steam channel, heat contracting machine exam there are barrels, then open electromagnetism valve to release high pressure steam to made plastic cover shrink to molding.
  Output: 450b/h
  Total power: 3Kw
  Dimension: 450*450*1100
  Weight: 50Kg
  Material: 304stainless steel
  Characteristic: simplicity of operator, convenient
  
8. Lifting barrel machine
  The number of lifting head: two pieces
 Output: 450b/h
  Total power: 0.02Kw
  Dimension: 900*600*1800
  Weight: 80Kg
  Material: 304stainless steel
  Characteristic: reduce intensity of labor
 
9. Conveying system (convey barrels in and out)
  Application: conveying the bottles
  Output: 450b/h
  Total power: 0.37Kw+0.55Kw
  Dimension: according to the arrangement of plant
  Conveying chains: engineering plastics
  Characteristic: steady conveying

Previous:QGF-600 5Gallon line
Next:QGF-200 5Gallon line